ENCAD 60e Service Manual page 143

It may be necessary to loosen (do not remove) the
screws that secure the left Leg Assembly to the Platen
so that the Lower Drive Roller Assembly clears the
ends of the screws that protrude inside of the Platen
when removing the Lower Drive Roller Assembly.
Ensure that the Lower Drive Supports and Fan As-
semblies are oriented in the correct position before
inserting into the Platen. See Figure 5-24 for visual
indication of correct orientation.
3. Slide the right side of the Lower Drive Roller Assembly inside
of the left side of the Platen until the first roller is inserted.
4. Position and hold one of the Fan Assemblies under the Lower
Drive Roller Assembly and between the first and second
rollers. Continue to insert the Lower Drive Roller Assembly
into the Platen.
5. Position and hold the other Fan Assembly (for PRO-60e only)
under the Lower Drive Roller Assembly and between the
seventh and last rollers. Continue to insert the Lower Drive
Roller Assembly completely into the Platen.
6. Reaching inside the Fan Exhaust hole under the Platen,
position and secure the Fan Assembly(ies) using a #2 Phillips
screwdriver.
7. Reinstall the Fan Exhaust Assembly(ies) using a #2 Phillips
screwdriver.
Novajet PROe Series Service Manual
NOTE
Assembly\Disassembly 143