ENCAD 60e Service Manual page 101

Figure 5-3. Keypad and Display Installation/Removal.
2. Turn the Right Cover Assembly over and disconnect the
Display power cable located at J13 from the Display Power
Converter. With a 1/4" socket or wrench, remove the four
kepnuts securing the Display Power Converter. See Figure 5-
3. Remove the Display Power Converter.
3. With a 1/4" socket or wrench, remove the four standoffs that
secures the LCD Display Assembly to the Keypad. Remove
the Display Assembly.
4. Disconnect the grounding flex cable from the large standoff
before removing the Keypad Assembly. See Figure 5-4 for
location. Remove the Keypad Assembly.
Novajet PROe Series Service Manual
Assembly\Disassembly 101