Electronics Cover Removal - ENCAD 60e Service Manual

Novajet PROe Series Service Manual
Figure 5-10. Electronics Cover Removal.
4. With a flathead screwdriver, press the Electronics Cover (p/o
the Ink Delivery System) tab located in the upper slot on the
left side of the Carrier Assembly. See Figure 5-10. Lift up on
the front left side of the Electronics Cover until it comes part
way off of the Carrier Assembly. Then lift up on the front
right side of the Electronics Cover and move the Electronics
Cover slightly to the left so that the back of it clears the Back
Support Bracket.
Assembly\Disassembly 115