Reseat Connectors On Mpcb And Carrier Board - ENCAD 60e Service Manual

Novajet PROe Series Service Manual

Reseat Connectors on MPCB and Carrier Board

Many problems can be corrected simply by removing and reseating
connections found in circuit assemblies. This process helps to clean
the contacts and can dissipate any static electrical charges that
might have developed.
50 Maintenance
Integrated circuits may become weakened or damaged
by electrical discharge. Do not touch or work near in-
tegrated circuits without wearing an ESD wrist strap.
Ribbon connectors can be easily damaged if incorrectly
handled. Observe extreme caution when handling the
ribbon connectors to avoid damage.