116 Program features
Local control
The control commands are given from the control panel keypad when the drive is in
local control. LOC indicates local control on the panel display.
Assistant panel
LOC
DIR
The control panel always overrides the external control signal sources when used in
local mode.
External control
When the drive is in external control, the commands are given through the standard
I/O terminals (digital and analog inputs) and/or the fieldbus interface. In addition, it is
also possible to set the control panel as the source for the external control.
External control is indicated with REM on the panel display.
Assistant panel
REM
DIR
The user can connect the control signals to two external control locations, EXT1 or
EXT2. Depending on the user selection, either one is active at a time. This function
operates on a 2 ms time level.
Settings
Panel key
LOC/REM
Parameter
1102
1001/1002
1103/1106
Phone: 800.894.0412 - Fax: 888.723.4773 - Web: www.clrwtr.com - Email: info@clrwtr.com
49.1Hz
49 1 Hz
.
0 5 A
.
10 7 %
.
00:00
MENU
49.1Hz
49 1 Hz
.
0 5 A
.
10 7 %
.
00:00
MENU
Additional information
Selection between local and external control
Selection between EXT1 and EXT2
Start, stop, direction source for EXT1/EXT2
Reference source for EXT1/EXT2
Basic panel
491
LOC
OUTPUT
Basic panel
491
REM
OUTPUT
.
Hz
FWD
.
Hz
FWD