124 Program features
Diagnostics
Actual signal
0161
Transistor output
The drive has one programmable transistor output. The output can be used either as
digital output or frequency output (0...16000 Hz). The update time for the
transistor/frequency output is 2 ms.
Settings
Parameter
Group
18 FREQ IN & TRAN OUT
Diagnostics
Actual signal
0163
0164
Actual signals
Several actual signals are available:
• Drive output frequency, current, voltage and power
• Motor speed and torque
• Intermediate circuit DC voltage
• Active control location (LOCAL, EXT1 or EXT2)
• Reference values
• Drive temperature
• Operating time counter (h), kWh counter
• Digital I/O and analog I/O status
• PID controller actual values.
Three signals can be shown simultaneously on the assistant control panel display
(one signal on the basic panel display). It is also possible to read the values through
the serial communication link or through the analog outputs.
Settings
Parameter
1501
1808
Group
32 SUPERVISION
Phone: 800.894.0412 - Fax: 888.723.4773 - Web: www.clrwtr.com - Email: info@clrwtr.com
Additional information
Frequency input value
Additional information
Transistor output settings
Additional information
Transistor output status
Transistor output frequency
Additional information
Selection of an actual signal to AO
Selection of an actual signal to frequency output
Actual signal supervision