Efb Protocol - ABB ACS310 User Manual

All parameters
No. Name/Value
DI2(INV)
DI3(INV)
DI4(INV)
DI5(INV)
DI1(INV)S1O
DI2(INV)S1O
DI3(INV)S1O
DI4(INV)S1O
DI5(INV)S1O
4602 FWD STEP
0.0...100.0%
4603 REV STEP
0.0...100.0%
4604 OFF TIME
0.0...1000.0 s
4605 FWD TIME
0.0...1000.0 s
4606 REV TIME
0.0...1000.0 s
4607 TRIG TIME
0.0...200.0 h
4608 COUNT
0...100
52 PANEL COMM
5201 STATION ID
1...247
Phone: 800.894.0412 - Fax: 888.723.4773 - Web: www.clrwtr.com - Email: info@clrwtr.com
Description
See selection DI1(INV).
See selection DI1(INV).
See selection DI1(INV).
See selection DI1(INV).
Enable on the falling edge of digital input DI1, trigger on
SUPRV1 OVER (parameter
parameter group
32 SUPERVISION.
See selection DI1(INV)S1O.
See selection DI1(INV)S1O.
See selection DI1(INV)S1O.
See selection DI1(INV)S1O.
Defines the forward step frequency for the pump cleaning
sequence in percent of the nominal motor frequency
(parameter MOTOR NOM FREQ).
9907
Forward step frequency
Defines the reverse step frequency for the pump cleaning
sequence in percent of the nominal motor frequency
(parameter MOTOR NOM FREQ).
9907
Reverse step frequency
Defines the length of the interval between forward and
reverse steps in the pump cleaning sequence in seconds.
Off time (step interval)
Defines the duration of each forward step in the pump
cleaning sequence in seconds.
Forward step duration
Defines the duration of each reverse step in the pump
cleaning sequence in seconds.
Reverse step duration
Defines the time for setting TIMER TRIG of parameter
PUMP CLEAN TRIG.
Trigger time in hours
Number of steps to be performed in the pump cleaning
sequence.
Number of steps
Communication settings for the control panel port on the
drive
Defines the address of the drive. Two units with the same
address are not allowed on-line.
Address
Actual signals and parameters 237
RELAY OUTPUT 1). See
1401
Def/FbEq
-2
-3
-4
-5
-7
-8
-9
-10
-11
0.0%
1 = 0.1%
0.0%
1 = 0.1%
0.0 s
1 = 0.1 s
0.0 s
1 = 0.1 s
0.0 s
1 = 0.1 s
0.0 h
4601
1 = 0.1 h
0
1 = 1
1
1 = 1