33 Information - ABB ACS310 User Manual

202 Actual signals and parameters
All parameters
No. Name/Value
3206 SUPERV 2 LIM
HI
x...x
3207 SUPERV 3
PARAM
x...x
3208 SUPERV 3 LIM
LO
x...x
3209 SUPERV 3 LIM
HI
x...x

33 INFORMATION

3301 FIRMWARE
0000...FFFF
hex
3302 LOADING
PACKAGE
2101...21FF
hex
3303 TEST DATE
3304 DRIVE RATING Displays the drive current and voltage ratings.
0000...FFFF
hex
3305 PARAMETER
TABLE
0000...FFFF
hex
Phone: 800.894.0412 - Fax: 888.723.4773 - Web: www.clrwtr.com - Email: info@clrwtr.com
Description
Defines the high limit for the second supervised signal
selected by parameter
Supervision wakes up if the value is above the limit.
Setting range depends on parameter
Selects the third supervised signal. Supervision limits are
defined by parameters
SUPERV 3 LIM HI. See parameter
PARAM.
Parameter index in group
SPEED.
0102
Defines the low limit for the third supervised signal selected
by parameter SUPERV 3 PARAM. Supervision wakes
3207
up if the value is below the limit.
Setting range depends on parameter
Defines the high limit for the third supervised signal selected
by parameter SUPERV 3 PARAM. Supervision wakes
3207
up if the value is above the limit.
Setting range depends on parameter
Firmware package version, test date etc.
Displays the version of the firmware package.
Eg 241A hex
Displays the version of the loading package.
2101 hex = ACS310-0x (Eur Industrial Drive)
2102 hex = ACS310-0x (US Industrial Drive)
Displays the test date.
Date value in format YY.WW (year, week)
Value in format XXXY hex:
XXX = Nominal current of the drive in Amperes. An "A"
indicates decimal point. For example if XXX is 9A7, nominal
current is 9.7 A.
Y = Nominal voltage of the drive:
2 = 3-phase 200...240 V
4 = 3-phase 380...480 V
Displays the version of the parameter table used in the
drive.
Eg 400E hex
SUPERV 2 PARAM.
3204
setting.
3204
SUPERV 3 LIM LO and
3208
SUPERV 1
3201
DATA. Eg 102 =
01 OPERATING
setting.
3207
setting.
3207
Def/FbEq
-
-
105
3209
1 = 1
-
-
-
-
type
dependent
00.00
0000 hex