Pump Cleaning - ABB ACS310 User Manual

All parameters
No. Name/Value
4426 PIPEFILL
TIMEOUT
0 = NOT SEL
1...60000 s
45 ENERGY SAVING Set-up of calculation and optimization of energy savings.
4501 ENERGY
OPTIMIZER
OFF
ON
4502 ENERGY
PRICE
0.00...655.35
4507 CO2 CONV
FACTOR
0.0...6553.5
tn/MWh
4508 PUMP POWER Pump power when connected directly to supply. Used for
0.0...1000.0%
4509 ENERGY
RESET
DONE
RESET
Phone: 800.894.0412 - Fax: 888.723.4773 - Web: www.clrwtr.com - Email: info@clrwtr.com
Description
Defines the maximum time Precharge is allowed to operate.
If this time elapses, PID is preset and PID is allowed to run
as it is parameterized – with or without reference ramps.
0: NOT SEL
1...60000 s: Max. Precharge operating time
Enables or disables the energy optimizer, which optimizes
the flux so that the total energy consumption and motor
noise level are reduced when the drive operates below the
nominal load. The total efficiency (motor and drive) can be
improved by 1...10% depending on load torque and speed.
Disabled
Enabled
Price of energy per kWh. Used for reference when energy
savings are calculated. See parameters
SAVED MWH,
0175
SAVED AMOUNT 2 and
Price of energy per kWh
Conversion factor used for multiplying the saved energy in
MWh to calculate the value of parameter
Conversion factor
reference when energy savings are calculated. See
parameters SAVED KWH,
0174
SAVED AMOUNT 1,
SAVED CO2.
Pump power in percent of nominal motor power
Resets energy calculators
MWH, SAVED AMOUNT 1,
0176
and SAVED CO2.
0178
Reset not requested (normal operation).
Reset energy counters, The value reverts automatically to
DONE.
Actual signals and parameters 235
0174
SAVED AMOUNT 1,
0176
SAVED CO2.
0178
0178
SAVED MWH,
0175
SAVED AMOUNT 2 and
0177
SAVED KWH,
0174
SAVED AMOUNT 2
0177
Def/FbEq
NOT SEL
1 = 1 s
OFF
0
1
0.00
SAVED KWH, (Currency)
0177
1 = 0.1
(Currency)
0.5
SAVED CO2. tn/MWh
1 = 0.1
tn/MWh
100.0%
0176
0178
1 = 0.1%
SAVED DONE
0175
0
1