How To Start Up The Drive Without A Control Panel - ABB ACS310 User Manual

58 Start-up and control with I/O
• Check the installation. See the checklist in chapter
55.
How you start up the drive depends on the control panel you have, if any.
• If you have no control panel, follow the instructions given in section
up the drive without a control panel.
• If you have a Basic Control Panel, follow the instructions given in section
to perform a manual start-up
• If you have an Assistant Control Panel, you can either run the Start-up
Assistant (see section
manual start-up (see section
The Start-up Assistant, which is included in the Assistant Control Panel only,
guides you through all essential settings to be done. In the manual start-up, the
drive gives no guidance; you go through the very basic settings by following the
instructions given in section

How to start up the drive without a control panel

Apply input power and wait for a moment.
Check that the red LED is not lit and the green LED is lit but not blinking.
Phone: 800.894.0412 - Fax: 888.723.4773 - Web: www.clrwtr.com - Email: info@clrwtr.com
on page 58.
on page 59.
How to perform a guided start-up
How to perform a manual start-up
How to perform a manual start-up
POWER-UP
The drive is now ready for use.
Installation checklist
How to start
on page 62) or perform a
on page 59).
on page 59.
.
on page
How