Actual Signals In The Short Parameter View; 04 Fault History; Parameters In The Short Parameter View; Reference Select - ABB ACS310 User Manual

152 Actual signals and parameters

Actual signals in the short parameter view

Actual signals in the short parameter view
No. Name/Value

04 FAULT HISTORY

0401 LAST FAULT

Parameters in the short parameter view

Parameters in the short parameter view
No. Name/Value
11 REFERENCE
SELECT
1105 REF1 MAX
12 CONSTANT
SPEEDS
1202 CONST
SPEED 1
1203 CONST
SPEED 2
1204 CONST
SPEED 3
13 ANALOG INPUTS Analog input signal processing. See group
1301 MINIMUM AI1
14 RELAY OUTPUTS Status information indicated through relay output, and relay
1401 RELAY
OUTPUT 1
16 SYSTEM
CONTROLS
1611 PARAMETER
VIEW

20 LIMITS

2008 MAXIMUM
FREQ

21 START/STOP

2102 STOP
FUNCTION
Phone: 800.894.0412 - Fax: 888.723.4773 - Web: www.clrwtr.com - Email: info@clrwtr.com
Description
Fault history (read-only). See group
the list of all parameters.
Code of the latest fault.
Description
Panel reference type, external control location selection and
external reference sources and limits. See group

REFERENCE SELECT

Defines the maximum value for external reference REF1.
Constant speed (drive output frequency) selection and
values. See group

12 CONSTANT SPEEDS

parameters.
Defines constant drive output frequency 1.
Defines constant drive output frequency 2.
Defines constant drive output frequency 3.
in the list of all parameters.
INPUTS
Defines the minimum %-value that corresponds to minimum
mA/(V) signal for analog input AI1.
operating delays. See group
of all parameters.
Selects a drive status indicated through relay output RO 1.
Parameter view, Run Enable, parameter lock etc. See group

16 SYSTEM CONTROLS

Selects the parameter view, ie which parameters are shown
on the control panel.
Drive operation limits. See group
parameters.
Defines the maximum limit for the drive output frequency.
Start and stop modes of the motor. See group
in the list of all parameters.
START/STOP
Selects the motor stop function.
04 FAULT HISTORY
in the list of all parameters.
13 ANALOG

14 RELAY OUTPUTS

in the list of all parameters.
in the list of all
20 LIMITS
FbEq
in
1 = 1
Default
11
E: 50.0 Hz
U: 60.0 Hz
in the list of all
E: 5.0 Hz
U: 6.0 Hz
E: 10.0 Hz
U: 12.0 Hz
E: 15.0 Hz
U: 18.0 Hz
1.0%
in the list
FAULT(-1)
SHORT
VIEW
E: 50.0 Hz
U: 60.0 Hz
21
COAST