Messages And Corrective Actions - YOKOGAWA DL7440 User Manual

16.2 Messages and Corrective Actions

Messages
Status Messages
Code Message
0 Aborted hard copy.
1 Aborted file operation.
2 Completed data store.
3 Completed data recall.
4 Completed GO/NO-GO.
10 Set to remote mode by communication
commands.
11 Local lockout by communication commands.
13 All settings will be initialized. Power up with
the RESET key depressed.
21 Completed action-on-trigger.
22 Executed unload.
23 Released the Preview mode.
24 Some of the channels are set to 50 ohm DC input. –
To keep the settings, press the SELECT key.
Pressing any other key will change the settings
to 1 Mohm DC input.
25 Aborted the search.
26 Executed the search, but no record was found
that matched the conditions.
27 Executed the search, but no pattern was found
that matched the conditions.
28 Pattern contains points that are between Thr
Lower and Thr Upper.
29 MATH will be performed on all records.
Abort the operation by setting the history
Display Mode to One.
30 Aborted the recalculation of the MATH.
31 The logic option is not installed on this model.
32 Aborted statistical measurement processing.
36 Key invalid for this model.
37 Aborted the analysis.
38 Data not detected. Execute again after changing
the settings or reacquiring the waveform.
16-2
A message (or an error message) may appear during operation. This section describes
the meanings of the messages and their corrective actions. The messages can be
displayed either in English or Japanese (see section 15.1). If the corrective action
requires servicing, contact your nearest YOKOGAWA dealer.
In addition to the messages listed below, there are communication error messages.
These messages are described in the Communication Interface User's Manual (IM
701450-17E, CD-ROM).
Corrective Action
–
–
–
–
–
Press SHIFT + CLEAR TRACE to enable local
mode.
To operate the keys, release lockout using
communication commands.
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
Sections
11.2
Chapter 12
12.1
12.1
10.9, 10.10
–
–
4.4
6.16
12.8, 12.9
11.2
5.4
10.2 to 10.4
10.2 to 10.4
10.2 to 10.4
10.4
–
–
Page ii
10.7
–
–
10.11
IM 701450-01E