Activating Triggers On The Commercial Power Supply (Simple) - YOKOGAWA DL7440 User Manual

6.7 Activating Triggers on the Commercial Power
Supply (SIMPLE)
Procedure
CH
CH
CH
CH
CH
CH
CH
CH
Setting the Trigger Source
Setting the Hold Off
Explanation
6-14
VERTICAL HORIZONTAL
1
SEARCH
PRESET ZOOM
2
3
V/DIV TIME/DIV
4
5
6
7
LOGIC
8
SNAPSHOT CLEAR TRACE
1. Press SIMPLE. The SIMPLE (Edge) menu appears.
2. Press the Source soft key. The Source menu appears.
3. On the DL7480, press the To Page 2 soft key.
4. Press the Line soft key.
4. Set the hold off time according to the procedures given in section 6.4.
This setting is used for activating a trigger on the rising edge of the waveform of the
commercial power being supplied to the DL7400. Waveforms can be observed by
synchronizing to the commercial power supply frequency (50 Hz or 60 Hz).
TRIGGER
• To exit the menu during operation, press ESC located
TRIG D
ACTION
above the soft keys.
MODE
• For a description of the operation using a USB keyboard or
a USB mouse, see section 4.3.
SIMPLE ENHANCED
DELAY
POSITION
HELP
IM 701450-01E