Setting The Vertical Position Of The Waveform - YOKOGAWA DL7440 User Manual

5.3

Setting the Vertical Position of the Waveform

Procedure
CH
CH
CH
CH
CH
CH
CH
CH
Explanation
Range of Movement
Resolution
Confirming the Vertical Position
5-4
VERTICAL HORIZONTAL
1
SEARCH
PRESET ZOOM
2
3
V/DIV TIME/DIV
4
5
6
7
LOGIC
8
SNAPSHOT CLEAR TRACE
1. Press one of the CH1 to CH8/4 keys to select the channel. The CH menu
appears.
You can select up to channel CH4 and CH8 on the DL7440 and DL7480, respectively.
2. Press the Position soft key.
3. Turn the jog shuttle to set the vertical position.
The vertical position can be moved within a range of ± 4 divisions from the center of the
waveform display frame.
0.01 divisions
For input waveforms and computed waveforms, the ground level and vertical position are
marked to the left of the waveform display frame.
Ground level mark
Vertical position mark
<For a description of this function, refer to page 2-2.>
TRIGGER
• To exit the menu during operation, press ESC located
TRIG D
ACTION
above the soft keys.
MODE
• For a description of the operation using a USB keyboard or
a USB mouse, see section 4.3.
SIMPLE ENHANCED
DELAY
POSITION
HELP
500 mV/div, Offset: –1 V, Offset Cancel: OFF, Position: 0 div
IM 701450-01E