Setting The Or Trigger (Enhanced) - YOKOGAWA DL7440 User Manual

6.12 Setting the OR Trigger (ENHANCED)

Procedure
CH
CH
CH
CH
CH
CH
CH
CH
Setting the Trigger Type
Setting the Slope of the Edge Trigger of Each Channel
6-30
VERTICAL HORIZONTAL
1
SEARCH
PRESET ZOOM
2
3
V/DIV TIME/DIV
4
5
6
7
LOGIC
8
SNAPSHOT CLEAR TRACE
1. Press ENHANCED. The ENHANCED menu appears.
2. Press the Type soft key. The Type menu appears.
3. Press the OR soft key.
4. Press the Set Pattern soft key. The Set Pattern dialog box opens.
5. Use jog shuttle & SELECT to set the slope of the edge trigger of each channel
to , , or – (IN, OUT, or – if Window is ON).
6. Press ESC. The Set Pattern dialog box closes.
<For a description of this function, refer to page 2-11.>
TRIGGER
• To exit the menu during operation, press ESC located
TRIG D
ACTION
above the soft keys.
• In the procedural explanation below, the term
MODE
jog shuttle & SELECT refers to the operation of
selecting/setting items and entering values using the
SIMPLE ENHANCED
jog shuttle and SELECT and RESET keys. For details
on this operation, see sections 4.1 or 4.2.
DELAY
• For a description of the operation using a USB keyboard
POSITION
or a USB mouse, see section 4.3.
HELP
IM 701450-01E