Operating The Dl7400 Using A Usb Keyboard Or A Usb Mouse - YOKOGAWA DL7440 User Manual

4.3 Operating the DL7400 Using a USB Keyboard
or a USB Mouse
Connecting a USB Keyboard
Keyboards That Can Be Used
USB PERIPHERAL Connector
4-6
You can connect a USB keyboard for entering file names, comments, and other
information. In addition, the functions of each key on the front panel of the DL7400 are
assigned to the keys on the keyboard (see appendix 6). Thus, the keyboard can be
used to carry out operations that are the same as the key operations on the DL7400.
Keyboards that can be used depend on the USB keyboard language that you selected in
section 15.2 (English or Japanese). The following keyboards that conform to USB
Human Interface Devices (HID) Class Version 1.1 can be used.
• When the USB keyboard language is English:
• When the USB keyboard language is Japanese: 109 keyboard and 89 keyboard
The default setting is the language specified by the message language selection (see
section 15.1). To use a Japanese keyboard, change the USB keyboard language
according to the procedures given in section 15.2.
Note
• Connect only the keyboards that are allowed.
• The operation of USB keyboards connected to a USB hub or those that have mouse
connectors is not guaranteed.
• For USB keyboards that have been tested for compatibility, contact your nearest
YOKOGAWA dealer.
Connect the USB keyboard to the USB PERIPHERAL connector on the rear panel.
There are two USB PERIPHERAL connectors (ports).
1 2 3
Port 1
Port 2
Pin No. Signal Name
1 VBUS: +5V
2 D–: –Data
3 D+: +Data
4 GND: Ground
4
104 keyboard and 89 keyboard
IM 701450-01E