Changing The File Attributes And Deleting Files - YOKOGAWA DL7440 User Manual

12.14 Changing the File Attributes and Deleting Files

Procedure
X-Y
SETUP DISPLAY
MEASURE CURSOR
MENU MENU
PRINT IMAGE SAVE
HISTORY
Selecting the Storage Medium/Directory
Changing the File Attribute
IM 701450-01E
Do not remove the storage medium (disk) or turn OFF the power when the
access indicator or icon of the storage medium is blinking. Doing so can
damage the storage medium or destroy the data on the medium.
FILE MISC RESET SELECT
PHASE
GO/NOGO MATH
SHIFT
ACQ START/STOP
1. Press FILE. The FILE menu appears.
2. Press the Utility soft key. The Utility menu and the File List window appear.
3. The procedure is the same as steps 14 and 15 on page 12-22.
4. Turn jog shuttle to select a file.
5. Press the Attr soft key. The attribute of the selected file changes.
To delete a file, change the file attribute to R/W (read/write)
CAUTION
• To exit the menu during operation, press ESC located
above the soft keys.
• In the procedural explanation below, the term
jog shuttle & SELECT refers to the operation of
selecting/setting items and entering values using the
jog shuttle and SELECT and RESET keys. For details
on this operation, see sections 4.1 or 4.2.
• For a description of the operation using a USB keyboard
or a USB mouse, see section 4.3.
12
12-43