13.8 Setting the Time Difference from GMT
(Greenwich Mean Time)
Procedure
X-Y
SETUP
DISPLAY
MEASURE
CURSOR
MENU
MENU
PRINT
IMAGE SAVE
HISTORY
Setting the Time Difference from GMT (Greenwich Mean Time)
Setting SNTP (Simple Network Time Protocol) (Firmware Version 1.30 or later)
IM 701450-01E
FILE
MISC
RESET
SELECT
PHASE
GO/NOGO
MATH
SHIFT
ACQ
START/STOP
1.
Press MISC. The MISC menu appears.
2.
Press the Network soft key. The Network menu appears.
3.
Press the Others soft key. The Others dialog box opens.
4.
Use jog shuttle & SELECT to set the Time Hour of Time Difference From GMT
in the range of –12 to 13.
5.
Likewise, set the Minute of Time Difference From GMT in the range of 0 to 59.
Note
Minute can be specified only if Time Hour is set in the range of –11 to 12. (Minute cannot be
specified if Time Hour is set to –12 or 13.)
6.
Use the jog shuttle to set Exec at Power On to ON or OFF.
7.
Use jog shuttle & SELECT to enter Server (IP address of the SNTP server).
8.
Use jog shuttle & SELECT to enter Time out in the range of 1 to 60 (s).
• To exit the menu during operation, press ESC located
above the soft keys.
• In the procedural explanation below, the term
jog shuttle & SELECT refers to the operation of
selecting/setting items and entering values using the
jog shuttle and SELECT and RESET keys. For details
on this operation, see sections 4.1 or 4.2.
• For a description of the operation using a USB keyboard
or a USB mouse, see section 4.3.
Hour
Minute
13
13-41