Setting The Edge Trigger (Simple) - YOKOGAWA DL7440 User Manual

6.5

Setting the Edge Trigger (SIMPLE)

Procedure
VERTICAL
1
CH
2
CH
3
CH
4
CH
5
CH
6
CH
7
CH
8
CH
Setting the Trigger Source
Setting the Trigger Level
IM 701450-01E
TRIGGER
HORIZONTAL
TRIG D
SEARCH ACTION
PRESET ZOOM MODE
V/DIV TIME/DIV
SIMPLE ENHANCED
DELAY
POSITION
LOGIC
SNAPSHOT CLEAR TRACE HELP
1. Press SIMPLE. The SIMPLE (Edge) menu appears.
2. Press the Source soft key. The Source menu appears.
3. Press the soft key corresponding to the desired trigger source.
• You can select up to channel CH4 and CH8 on the DL7440 and DL7480, respectively.
• To set CH7 and CH8, press the To Page 2 soft key to display the page 2 menu.
4. Press the Level soft key.
5. Turn the jog shuttle to set the trigger level.
Pressing RESET resets the trigger level to the current offset voltage.
Note
The trigger level setting applies to both simple and enhanced triggers.
<For a description of this function, refer to page 2-8.>
• To exit the menu during operation, press ESC located
above the soft keys.
• For a description of the operation using a USB keyboard or
a USB mouse, see section 4.3.
6
6-9