Setting The Action-On-Trigger - YOKOGAWA DL7440 User Manual

6.16 Setting the Action-on-Trigger

Procedure
MENU
PRINT
HISTORY
CH
CH
CH
CH
CH
CH
CH
CH
Setting the Action Count
Executing/Aborting Action-on-Trigger
6-44
MENU
IMAGE SAVE SHIFT
ACQ START/STOP
VERTICAL HORIZONTAL
1
SEARCH
2 PRESET ZOOM
3
V/DIV TIME/DIV
4
5
6
7
LOGIC
8
SNAPSHOT CLEAR TRACE
1. Press SHIFT+MODE (ACTION). The ACTION menu appears.
2. Press the soft key corresponding to the action to be enabled and select ON.
If Send Mail is turned ON, use the jog shuttle to set the mail transmission count
(MailCount).
3. Turn the jog shuttle to set the action count (ACQ Count).
Pressing RESET sets the count to Infinite.
4. Press the Exec soft key. The waveform acquisition starts and action-on-trigger
is executed. The Exec soft key changes to Abort. To abort action-on-trigger,
press the Abort soft key or START/STOP. The waveform acquisition stops and
action-on-trigger is aborted.
TRIGGER
• To exit the menu during operation, press ESC located
TRIG D
ACTION
above the soft keys.
MODE
• For a description of the operation using a USB keyboard or
a USB mouse, see section 4.3.
SIMPLE ENHANCED
DELAY
POSITION
HELP
IM 701450-01E