Performing Sequential Store (Single(N) Mode) - YOKOGAWA DL7440 User Manual

7.6

Performing Sequential Store (SINGLE(N) Mode)

Procedure
CH
CH
CH
CH
CH
CH
CH
CH
Explanation
7-10
VERTICAL HORIZONTAL
1
SEARCH
PRESET ZOOM
2
3
V/DIV TIME/DIV
4
5
6
7
LOGIC
8
SNAPSHOT CLEAR TRACE
1. Press MODE. The MODE menu appears.
2. Press the Single(N) soft key to set the trigger mode to Single(N).
3. Use the jog shuttle to set Single(N) Count.
This setting is for using the sequential store (SINGLE (N) mode) function. The
sequential store function sequentially acquires waveforms the specified number of times
when the trigger conditions are met and displays the waveforms after acquisition stops.
In sequential store (SINGLE (N) mode), the interval for acquiring waveforms is minimized
by not performing other processes such as waveform display until the acquisition of the
specified number of waveforms is complete.
<For a description of this function, refer to page 2-17.>
TRIGGER
• To exit the menu during operation, press ESC located
TRIG D
ACTION
above the soft keys.
MODE
• For a description of the operation using a USB keyboard or
a USB mouse, see section 4.3.
SIMPLE ENHANCED
DELAY
POSITION
HELP
IM 701450-01E