Displaying X-Y Waveforms - YOKOGAWA DL7440 User Manual

8.5

Displaying X-Y Waveforms

Procedure
SETUP
MEASURE
MENU
PRINT
HISTORY
Selecting the Display Mode
Selecting the X-Axis Mode
8-12
X-Y
DISPLAY FILE MISC RESET
PHASE
CURSOR GO/NOGO MATH
MENU
IMAGE SAVE SHIFT
ACQ START/STOP
1. Press SHIFT+DISPLAY(X-Y). The X-Y menu appears.
2. Press the Mode soft key. The Mode menu appears.
3. Press the T-Y, X-Y, or T-Y&X-Y soft key to select the mode.
Steps 4 to 11 are necessary only when X-Y or T-Y&X-Y is selected.
4. Press the X Axis soft key to select Single or Dual.
<For a description of this function, refer to page 2-19.>
• To exit the menu during operation, press ESC located
SELECT
above the soft keys.
• For a description of the operation using a USB keyboard or
a USB mouse, see section 4.3.
IM 701450-01E