Copying Files - YOKOGAWA DL7440 User Manual

12.15 Copying Files

Procedure
X-Y
SETUP DISPLAY
MEASURE CURSOR
MENU MENU
PRINT IMAGE SAVE
HISTORY
Selecting the Copy Source
IM 701450-01E
Do not remove the storage medium (disk) or turn OFF the power when the
access indicator or icon of the storage medium is blinking. Doing so can
damage the storage medium or destroy the data on the medium.
FILE MISC RESET SELECT
PHASE
GO/NOGO MATH
SHIFT
ACQ START/STOP
1. Press FILE. The FILE menu appears.
2. Press the Utility soft key. The Utility menu and the File List window appear.
3. Press the Function soft key. The Function menu appears.
4. Press the Copy soft key.
Selecting the Copy Source Storage Medium or Directory
5. The procedure is the same as steps 14 and 15 on page 12-22.
Selecting/Resetting the Copy Source Files One at a Time
6. Turn jog shuttle to select a file.
7. Press the Set/Reset soft key. An asterisk (*) is displayed to the left of the
selected file to indicate that it will be copied. Pressing the Set/Reset soft key
again removes the asterisk (*) to the left of the selected file. The file will not be
copied. Proceed to step 11.
CAUTION
• To exit the menu during operation, press ESC located
above the soft keys.
• In the procedural explanation below, the term
jog shuttle & SELECT refers to the operation of
selecting/setting items and entering values using the
jog shuttle and SELECT and RESET keys. For details
on this operation, see sections 4.1 or 4.2.
• For a description of the operation using a USB keyboard
or a USB mouse, see section 4.3.
12
12-47