Checking The Contents Of The Package - YOKOGAWA DL7440 User Manual

Checking the Contents of the Package

DL7440/DL7480
Model and Suffix Codes
IM 701450-01E
Unpack the box and check the contents before operating the instrument. If some of the
contents are not correct, or if any items are missing or damaged, contact the dealer from
whom you purchased them.
Check that the model name and suffix code given on the name plate on the rear panel
match those on the order.
100-120/220-240V AC
A B C D
320VA MAX 50/60Hz
E F G H
VIDEO OUT
(VGA)
WARNING
Do not operate within reading the
safety precautions in the user s manual.
MODEL
SUFFIX
NO.
Made in Japan
Model
701450 (DL7440)
701460 (DL7440)
701470 (DL7480)
701480 (DL7480)
Power cord
Built-in storage
media drive
(Select either drive for the built-in storage media drive at the time of purchase)
Options
1 1 roll paper (B9850NX) is included.
2 The DL7480 comes standard with four 700988 passive probes.
3 The DL7480 comes standard with 4 probe power supply terminals.
4 The /G4 option contains the user-defined computation function. Therefore, it cannot be
specified simultaneously with the /G2 option.
5 /F5, /F7, and /F8 options cannot be specified simultaneously.
6 /E4 and /EX4 options cannot be specified simultaneously.
7 /E4 and /EA4 options cannot be specified simultaneously.
8 When the /F9 option is specified, the marking on the DL7400 front panel changes to
"FLEXRAY SIGNAL ANALYZER." In addition, the FLEXRAY key (SHIFT+MEASURE) is added.
ETHERNET GP-IB(IEEE488)
100BASE-TX
SCSI
LINK ACT
USB
A B
USB
PERIPHERAL
LOGIC PROBE
EXT CLOCK IN
EXT TRIG IN
TRIG GATE IN
Suffix Specifications
4-channel, 4 MW memory model
4-channel, 16 MW memory model
8-channel, 4 MW memory model
8-channel, 16 MW memory model
-D UL/CSA Standard power cord (Part No.: A1006WD)
[Maximum rated voltage: 125 V; Maximum rated current: 7 A]
-F VDE Standard Power Cord (Part No.: A1009WD) [Maximum
rated voltage: 250 V; Maximum rated current: 10 A]
-Q BS Standard Power Cord (Part No.: A1054WD) [Maximum
rated voltage: 250 V; Maximum rated current: 10 A]
-R AS Standard Power Cord (Part No.: A1024WD) [Maximum
rated voltage: 250 V; Maximum rated current: 10 A]
-H GB Standard Power Cord (complies with the CCC)(Part
No.: A1064WD) [Maximum rated voltage: 250 V, Maximum
rated current: 10 A]
-J1 Floppy disk drive
-J2 Zip drive
1
/B5 Built-in printer
/E4 4 additional 700988 passive probes
DL7480)
/EX4 4 additional 701941 miniature passive probes in place of
700988 passive probes
/EA4 4 additional 701941 miniature passive probes
for the DL7480)
/P4 4 additional probe power supply terminals
the DL7480)
/N3 Logic input for the 4 MW memory model
/N4 Logic input for the 16 MW memory model
/C7 SCSI
/C10 Ethernet interface
/G2 User-defined computation
/G4 Power supply analysis function
computation)
2
/F5 I C + SPI bus analysis
/F7 CAN + SPI bus analysis
2
/F8 I C + CAN + SPI bus analysis
/F9 FlexRay Signal Analyzer
MODEL
SUFFIX
NO.
Made in Japan
2,6,7
(option only for the
6
3
(option only for
4
(includes user-defined
5
5
5
8
7
(option only
iii