Setting The Acquisition Mode - YOKOGAWA DL7440 User Manual

7.5

Setting the Acquisition Mode

Procedure
SETUP
MEASURE
MENU
PRINT
HISTORY
Setting the Acquisition Mode
Setting the Acquisition Count
7-6
X-Y
DISPLAY FILE MISC RESET
PHASE
CURSOR GO/NOGO MATH
MENU
IMAGE SAVE SHIFT
ACQ START/STOP
1. Press ACQ. The ACQ menu appears.
2. Press the Mode soft key. The Mode menu appears.
3. Press a soft key to select the acquisition mode.
You may not be able to select some modes depending on the trigger mode setting.
4. Press the Count soft key.
You cannot set the acquisition count when the trigger mode is Single or Single (N).
5. Turn the jog shuttle to set the acquisition count.
• Pressing RESET resets the count to Infinite.
• If the acquisition mode is Average and you set Count to Infinite, proceed to step 6.
<For a description of this function, refer to page 2-15.>
• To exit the menu during operation, press ESC located
SELECT
above the soft keys.
• For a description of the operation using a USB keyboard or
a USB mouse, see section 4.3.
IM 701450-01E