Formatting The Storage Medium - YOKOGAWA DL7440 User Manual

12.6 Formatting the Storage Medium

Procedure
SETUP
MEASURE
MENU
PRINT
HISTORY
12-10
• Do not remove the storage medium (disk) or turn OFF the power when the
access indicator or icon of the storage medium is blinking. Doing so can
damage the storage medium or destroy the data on the medium.
• If the DL7400 cannot recognize a formatted medium, format the disk again on
the DL7400. Note that all the data on the storage medium are cleared when the
storage medium is formatted. Be sure to back up important data beforehand.
X-Y
DISPLAY FILE MISC RESET
PHASE
CURSOR GO/NOGO MATH
MENU
IMAGE SAVE SHIFT
ACQ START/STOP
1. Press FILE. The FILE menu appears.
2. Press the Utility soft key to display the Utility menu and the File List window.
CAUTION
• To exit the menu during operation, press ESC located
SELECT
above the soft keys.
• In the procedural explanation below, the term
jog shuttle & SELECT refers to the operation of
selecting/setting items and entering values using the
jog shuttle and SELECT and RESET keys. For details
on this operation, see sections 4.1 or 4.2.
• For a description of the operation using a USB keyboard
or a USB mouse, see section 4.3.
IM 701450-01E