Performing Automated Measurements Of Waveform Parameters On Dual Areas - YOKOGAWA DL7440 User Manual

10.8 Performing Automated Measurements of
Waveform Parameters on Dual Areas
Procedure
X-Y
SETUP DISPLAY
MEASURE CURSOR
MENU MENU
PRINT IMAGE SAVE
HISTORY
Entering the Menu for the Automated Measurements of Waveform Parameters on
Dual Areas
IM 701450-01E
FILE MISC RESET SELECT
PHASE
GO/NOGO MATH
SHIFT
ACQ START/STOP
1. Press MEASURE. The MEASURE menu appears.
2. Press the Mode soft key. The Mode menu appears.
3. Press the ON, Statistics, or History Statistics soft key.
4. Press the Item Setup soft key. The Item Setup menu and Item Setup dialog
box appear.
5. Press the Dual Area soft key to select ON. The Dual Area menu appears.
6. Press the Item Setup soft key. The Item Setup dialog box opens.
• To exit the menu during operation, press ESC located
above the soft keys.
• In the procedural explanation below, the term
jog shuttle & SELECT refers to the operation of
selecting/setting items and entering values using the
jog shuttle and SELECT and RESET keys. For details
on this operation, see sections 4.1 or 4.2.
• For a description of the operation using a USB keyboard
or a USB mouse, see section 4.3.
10
10-61