Setting Waveform Labels And Turning On/Off The Display - YOKOGAWA DL7440 User Manual

8.9 Setting Waveform Labels and Turning ON/OFF
the Display
Procedure
Setting Waveform Labels
CH
CH
CH
CH
CH
CH
CH
CH
Setting Waveform Labels for CH1 to CH8
Setting LOGIC Waveform Labels
8-18
VERTICAL HORIZONTAL
1
SEARCH
PRESET ZOOM
2
3
V/DIV TIME/DIV
4
5
6
7
LOGIC
8
SNAPSHOT CLEAR TRACE
1. Press one of the CH1 to CH8/4 keys to select the channel to which a waveform
label is to be assigned.
You can select up to CH4 and CH8 on the DL7440 and DL7480, respectively.
2. Press the Next (1/2) soft key. The page 2 menu appears.
3. Press the Label soft key. A keyboard used to enter values and strings appears.
4. Use jog shuttle & SELECT to set the waveform label.
1. Press LOGIC. The LOGIC menu appears.
2. Press the Label soft key. The Label dialog box opens.
3. Use jog shuttle & SELECT to select the bit to which the waveform label is to be
assigned. A keyboard used to enter values and strings appears.
4. Use jog shuttle & SELECT to set the waveform label.
TRIGGER
• To exit the menu during operation, press ESC located
TRIG D
ACTION
above the soft keys.
MODE
• For a description of the operation using a USB keyboard or
a USB mouse, see section 4.3.
SIMPLE ENHANCED
DELAY
POSITION
HELP
IM 701450-01E