Setting Up Tcp/Ip - YOKOGAWA DL7440 User Manual

13.2 Setting Up TCP/IP

Procedure
X-Y
SETUP DISPLAY
MEASURE CURSOR
MENU MENU
PRINT IMAGE SAVE
HISTORY
Entering the TCP/IP Setup Menu
Turning ON/OFF DHCP
IM 701450-01E
FILE MISC RESET SELECT
PHASE
GO/NOGO MATH
SHIFT
ACQ START/STOP
1. Press MISC. The MISC menu appears.
2. Press the Network soft key. The Network menu appears.
3. Press the TCP/IP Setup soft key. The TCP/IP Setup dialog box opens.
4. Use jog shuttle & SELECT to set DHCP to ON or OFF.
• If you select OFF, proceed to step 5.
• If you set DHCP to ON, you do not have to set the IP address, subnet mask, default
gateway below. To set up the DNS, proceed to step 8. If you do not wish to set up the
DNS, check the network cable connection and restart the DL7400. The IP address,
subnet mask, and default gateway are automatically configured.
• To exit the menu during operation, press ESC located
above the soft keys.
• In the procedural explanation below, the term
jog shuttle & SELECT refers to the operation of
selecting/setting items and entering values using the
jog shuttle and SELECT and RESET keys. For details
on this operation, see sections 4.1 or 4.2.
• For a description of the operation using a USB keyboard
or a USB mouse, see section 4.3.
DHCP
IP address (when DHCP is OFF)
Subnet Mask
(when DHCP is OFF)
Default gateway
(when DHCP is OFF)
13
13-3