Performing Go/No-Go Determination Using Zones - YOKOGAWA DL7440 User Manual
Digital oscilloscope
Hide thumbs
Also See for DL7440:
- User manual (55 pages) ,
- User manual (176 pages) ,
- Operation manual (29 pages)
Table of Contents
Advertisement
10.9 Performing GO/NO-GO Determination Using
Zones
Procedure
SETUP
MEASURE
MENU
PRINT
HISTORY
Entering the GO/NO-GO Determination Setup Menu
Creating Determination Zones
10-66
X-Y
DISPLAY
FILE
MISC
RESET
PHASE
CURSOR
GO/NOGO
MATH
MENU
IMAGE SAVE
SHIFT
ACQ
START/STOP
1.
Press GO/NOGO. The GO/NO-GO menu appears.
2.
Press the Mode soft key. The Mode menu appears.
3.
Press the Zone soft key. The Zone menu appears.
Stop waveform acquisition after displaying the reference waveform, and then create
the zone.
4.
Press the To EditMenu soft key. The To Edit menu appears.
Creating a New Zone
5.
Press the New soft key. The Trace menu appears.
6.
Press the CH1 to CH8/4, Math1, or Math2 soft key to select the reference
waveform for creating the zone. The Edit menu appears.
•
On the DL7440, select CH1 to CH4, Math1, or Math2.
•
On the DL7480, select CH1 to CH8, Math1, or Math2. CH7, CH8, Math1, and Math2
appear when you press the To Page 2 soft key.
• To exit the menu during operation, press ESC located
SELECT
above the soft keys.
• In the procedural explanation below, the term
jog shuttle & SELECT refers to the operation of
selecting/setting items and entering values using the
jog shuttle and SELECT and RESET keys. For details
on this operation, see sections 4.1 or 4.2.
• For a description of the operation using a USB keyboard
or a USB mouse, see section 4.3.
IM 701450-01E
Advertisement
Table of Contents
