Saving The Detailed Analysis List Of Spi Signals - YOKOGAWA DL7440 User Manual

12.11 Saving the Detailed Analysis List of SPI
Signals
Procedure
X-Y
SETUP DISPLAY
MEASURE CURSOR
MENU MENU
PRINT IMAGE SAVE
HISTORY
Selecting the Save Destination Medium/Directory
Setting the File Name and Comment
IM 701450-01E
Do not remove the storage medium (disk) or turn OFF the power when the
access indicator or icon of the storage medium is blinking. Doing so can
damage the storage medium or destroy the data on the medium.
FILE MISC RESET SELECT
PHASE
GO/NOGO MATH
SHIFT
ACQ START/STOP
1. Press FILE. The FILE menu appears.
2. Press the File Item soft key. The File Item menu appears.
3. Press the To Page 2 soft key.
4. Press the SPI Bus soft key.
Depending on the model, the SPI Bus item may appear under the File Item menu
(Page No. (1/2)) without having to press the Top Page 2 soft key.
5. Press the Save soft key. The Save menu appears.
6. The procedure is the same as steps 13 to 15 on page 12-22.
7. The procedure is the same as steps 16 to 19 on page 12-22.
CAUTION
• To exit the menu during operation, press ESC located
above the soft keys.
• In the procedural explanation below, the term
jog shuttle & SELECT refers to the operation of
selecting/setting items and entering values using the
jog shuttle and SELECT and RESET keys. For details
on this operation, see sections 4.1 or 4.2.
• For a description of the operation using a USB keyboard
or a USB mouse, see section 4.3.
12
12-33