Checking The Presence Of The Ethernet Interface (Optional) And The Mac Address - YOKOGAWA DL7440 User Manual

13.9 Checking the Presence of the Ethernet
Interface (Optional) and the MAC Address
Procedure
X-Y
SETUP DISPLAY
MEASURE CURSOR
MENU MENU
PRINT IMAGE SAVE
HISTORY
Explanation
IM 701450-01E
FILE MISC RESET SELECT
PHASE
GO/NOGO MATH
SHIFT
ACQ START/STOP
1. Press MISC. The MISC menu appears.
2. Press the Overview soft key. The Overview window opens.
Pressing a panel key other than the Overview soft key clears the Overview
window.
When Ether:Yes(/C10) appears for the Option item in the Overview window, this
indicates that the Ethernet interface is installed. The information displayed on
the right (MAC:000064_846_004 in the example) is the MAC address.
Note
• Ether:Yes(/C10) is displayed only if the Ethernet interface option is installed.
• If XXXXXX_XXX_XXX is displayed for the MAC address, contact your nearest YOKOGAWA
dealer.
You can check the presence of the Ethernet interface (optional) and the MAC address.
MAC address is a unique address that is pre-assigned to the DL7400.
The Presence of the Ethernet Interface (Optional)
Displayed in the Ether section of the Overview window.
Yes The Ethernet interface is installed.
No The Ethernet interface is not installed.
MAC Address
MAC address is a unique address that is pre-assigned to the DL7400. It is required in
identifying the instruments on the network.
• To exit the menu during operation, press ESC located
above the soft keys.
• For a description of the operation using a USB keyboard or
a USB mouse, see section 4.3.
13
13-43