Performing Go/No-Go Determination Using Measured Waveform Parameters - YOKOGAWA DL7440 User Manual

10.10 Performing GO/NO-GO Determination Using
Measured Waveform Parameters
Procedure
SETUP
MEASURE
MENU
PRINT
HISTORY
Entering the GO/NO-GO Determination Setup Menu
Setting the Determination Condition
10-72
X-Y
DISPLAY FILE MISC RESET
PHASE
CURSOR GO/NOGO MATH
MENU
IMAGE SAVE SHIFT
ACQ START/STOP
1. Press GO/NOGO. The GO/NO-GO menu appears.
2. Press the Mode soft key. The Mode menu appears.
3. Press the Parameter soft key. The Parameter menu appears.
4. Press the Setup soft key. The Setup dialog box opens.
5. Use jog shuttle & SELECT to set the following items of determination
parameter Param1.
• Select whether to perform determination using the corresponding
determination parameter (ON/OFF) (Mode box).
• Select a determination target waveform of CH1 to CH8/4*, Math1, or Math2
(Trace box).
• Select the measurement parameter (Item box).
• To exit the menu during operation, press ESC located
SELECT
above the soft keys.
• In the procedural explanation below, the term
jog shuttle & SELECT refers to the operation of
selecting/setting items and entering values using the
jog shuttle and SELECT and RESET keys. For details
on this operation, see sections 4.1 or 4.2.
• For a description of the operation using a USB keyboard
or a USB mouse, see section 4.3.
IM 701450-01E