Chapter 8 Waveform Display and Information Display
8.1
Setting the Display Format
Procedure
Setting the Display Format of Normal Waveforms
X-Y
SETUP
DISPLAY
MEASURE
CURSOR
MENU
MENU
PRINT
IMAGE SAVE
HISTORY
Selecting the Display Format
Setting the Waveform Mapping
IM 701450-01E
FILE
MISC
RESET
SELECT
PHASE
GO/NOGO
MATH
SHIFT
ACQ
START/STOP
1.
Press DISPLAY. The DISPLAY menu appears.
2.
Press the Format soft key. The Format menu appears.
3.
Press one of the Single to Octal keys to select the display format.
Octal can be used on the DL7480.
4.
Press the Next (1/2) soft key The page 2 menu appears.
5.
Press the Mapping soft key.
6.
Press the Auto, Fixed, or User soft key to select the waveform mapping method.
•
If you select Auto or Fixed, you are done.
•
If you select User, proceed to step 7.
7.
Press the Set Mapping soft key. The Set Mapping dialog box appears.
8.
Use jog shuttle & SELECT to set the mapping number of each channel.
• To exit the menu during operation, press ESC located
above the soft keys.
• In the procedural explanation below, the term
jog shuttle & SELECT refers to the operation of
selecting/setting items and entering values using the
jog shuttle and SELECT and RESET keys. For details
on this operation, see sections 4.1 or 4.2.
• For a description of the operation using a USB keyboard
or a USB mouse, see section 4.3.
8
8-1