Chapter 13 Ethernet Communications (Optional); Connecting The Dl7400 To The Network - YOKOGAWA DL7440 User Manual

Chapter 13 Ethernet Communications (Optional)

13.1 Connecting the DL7400 to the Network

Ethernet Interface Specifications
Items Necessary for Connection
IM 701450-01E
A 100BASE-TX port is provided on the rear panel of the DL7400.
Item
Number of communication ports
Electrical and mechanical specifications
Transmission system
Transmission rate
Communication protocol
Supported service
Connector type
* SNTP and Web DAV are available only on models with a firmware version of 1.30 or later.
ETHERNET 100BASE-TX port
RJ-45 modular jack
Cable
Be sure to use one the following cables for connection.
• UTP (Unshielded Twisted-Pair) cable (category 5 or better)
• STP (Shielded Twisted-Pair) cable (category 5 or better)
Specifications
1
Conforms to IEEE802.3
Ethernet (100BASE-TX/10BASE-T)
100 Mbps max.
TCP/IP
FTP server, FTP client (network drive), LPR client
(network printer), SMTP client (mail transmission),
Web server, DHCP, DNS, SNTP, and Web DAV*
RJ-45 connector
ETHERNET
100BASE-TX
LINK ACT
LINK LED ACT LED
Illuminates when the link Illuminates when packet
between the port on the transmission is normal.
DL7400 and the connected
device is established and
communication is mutually
possible.
13
13-1