Printing Using The Built-In Printer (Optional) - YOKOGAWA DL7440 User Manual

11.2 Printing Using the Built-in Printer (Optional)

Procedure
X-Y
SETUP DISPLAY
MEASURE CURSOR
MENU MENU
PRINT IMAGE SAVE
HISTORY
Selecting the Built-in Printer
Selecting the Print Format
IM 701450-01E
FILE MISC RESET SELECT
PHASE
GO/NOGO MATH
SHIFT
ACQ START/STOP
1. Press SHIFT+PRINT (MENU). The PRINT menu appears.
2. Press the Print to soft key. The Print to menu appears.
Net Print appears only if the Ethernet interface option is installed.
3. Press the Built-in soft key.
4. Press the Format soft key to select Normal or Long.
• If you select Normal, proceed to step 9.
• If you select Long, proceed to step 5.
Setting the Magnification
5. Press the Mag soft key. The number of pages that will be printed at the
specified Mag value (magnification) is displayed.
6. Turn the jog shuttle to set the magnification.
Setting the Print Range
7. Press the Time Range1/Time Range2 soft key to set the jog shuttle control to
Time Range1, Time Range2, or both Time Range1 and Time Range 2.
• If you select Time Range1, you can move Time Range1.
• If you select Time Range2, you can move Time Range2.
• If you select both Time Range1 and Time Range2, you can move Time Range1 and
Time Range2 horizontally without changing the spacing between the two. The value of
the digit being specified by Time Range1 changes.
8. Turn the jog shuttle to set the print range.
• To exit the menu during operation, press ESC located
above the soft keys.
• In the procedural explanation below, the term
jog shuttle & SELECT refers to the operation of
selecting/setting items and entering values using the
jog shuttle and SELECT and RESET keys. For details
on this operation, see sections 4.1 or 4.2.
• For a description of the operation using a USB keyboard
or a USB mouse, see section 4.3.
11
11-3