Chapter 10 Ethernet Interface; Ethernet Interface Features And Specifications - YOKOGAWA 2560A User Manual

Precision dc calibrator
Hide thumbs Also See for 2560A:
Table of Contents

Advertisement

Chapter 10
Ethernet Interface

10.1 Ethernet Interface Features and Specifications

Ethernet Interface Features
Reception Feature
• With the exception of turning the power switch on and off, you can use the reception feature to
specify the same settings that you specify by using the front panel keys.
• The 2560A can receive panel setup parameters, error codes, and other output requests from a
controller.
• The 2560A can receive status report commands.
Transmission Feature
The 2560A can transmit panel setup parameters, status byte, error codes that occur, and so on.
Ethernet Interface Specifications
Item
Number of ports
Connector type
Electrical and mechanical
Simultaneous connections
Transmission system
Communication protocol
Supported services
Switching between Remote and Local Modes
When Switching from Local to Remote Mode
The 2560A switches to remote mode when it is in local mode and receives a
:COMMunicate:REMote ON command from the PC.
• The REMOTE indicator turns on.
• All dials and switches are disabled except for the flipping of the OUTPUT switch to the LOCAL
side to change the 2560A to local mode.
• Settings entered in local mode are retained even when the 2560A switches to remote mode.
When Switching from Remote to Local Mode
When the 2560A is in remote mode and you flip the OUTPUT switch to the LOCAL side,
the 2560A switches to local mode. However, this does not work if the 2560A has received a
:COMMunicate:LOCKout ON command from the PC. The 2560A switches to local mode when it
receives a :COMMunicate:REMote OFF command from the PC, regardless of the local lockout
state.
• The REMOTE indicator turns off.
• Dials and switches can be used.
• Settings entered in remote mode are retained even when the 2560A switches to local mode.
Note
You cannot use the Ethernet interface simultaneously with other interfaces (GP-IB or USB).
IM 2560A-01EN
Specifications
1
RJ-45 connector
IEEE802.3 compliant
3
ETHERNET(100BASE-TX/10BASE-T)
TCP/IP(VXI-11)
VXI-11 server, DHCP client
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
App
Index
10-1

Advertisement

Table of Contents
loading

Table of Contents