Triggering On An A To B(N) Trigger (Enhanced) - YOKOGAWA ScopeCorder DL950 User Manual

4.8

Triggering on an A to B(N) Trigger (Enhanced)

This section explains the following settings for triggering on an A to B(N) trigger:
Applicable in Scope Mode
• Trigger source
• State condition
• State condition achievement condition
• Number of times state condition B must be met
• Trigger conditions (trigger level, hysteresis)
Trigger Menu
1.
On the waveform screen's MENU, tap TRIGGER > MENU, or press TRIG.MENU. A trigger
menu appears.
IM DL950-02EN
Select Enhanced.
Set the trigger type to A to B (N).
See "Setting the State and
Trigger Conditions."
Set the trigger position, trigger delay, and hold-off
► sec. 4.2
Set the trigger mode. ► sec. 4.1
► "A to B(N) Trigger (Enhanced)" in the Features Guide
4-11