Instantaccess Bar ™ Buttons - Furuno FAR-2218-BB Operator's Manual

1. OPERATIONAL OVERVIEW
1.4.1 InstantAccess bar
Upper half
Button
PULSE
L
TUNE
MAN
IR
OFF
ES
OFF
EAV
OFF
ACE
OFF
Lower half
Button
MAP
OFF
HL
OFF
CU/TM
RESET
OWN
AIS
AIS
PLT1
100
1-6
™
buttons
Standby/Transmit button.
Toggle between standby (STBY) and transmit (TX).
Pulselength button.
Selects the pulselength.
Tune button.
Toggles between automatic and manual tuning. (See section 1.17.1.)
Note: For SSD antennas, this button appears as "TX CH x" ("x" de-
notes the channel used for transmission).
Interference Rejector button.
Activates/deactivates the interference rejector feature.
Echo Stretch button.
Activates/deactivates the echo stretch function.
Note: This item is grayed out under the following conditions:
• ACE function is active.
• No position data is input (excludes Dead Reckoning).
Echo Average button.
Activates/deactivates the echo average function.
ACE button.
Activates/deactivates the ACE (Auto Clutter Elimination) function.
Radar Map button.
Shows/hides the radar map marks.
HEADING LINE button.
Left-click and hold to hide the heading line.
CU/TM RESET button
• Puts the ship's heading at the top of the screen in course-up mode
the moment this button is pressed.
• Resets the ship's position to a point of 75% radius opposite to the ex-
tension of the heading line passing through the display center in true
motion modes.
Own Ship AIS button.
Shows the AIS VOYAGE DATA for AIS data setup.
AIS Message button.
• Displays received AIS messages.
• Opens the [AIS Message] menu.
Brilliance button.
• Adjusts the screen brilliance
• Opens the [BRILLIANCE] menu.
• Selects the color palette. See section 1.44.1.
Description
Description