How To Measure Range And Bearing Between Two Targets - Furuno FAR-2218-BB Operator's Manual

Hide thumbs Also See for FAR-2218-BB:
Table of Contents

Advertisement

1. OPERATIONAL OVERVIEW
1.35
How to Measure Range and Bearing Between
Two Targets
How to measure range and bearing from the [CURSOR] menu
This procedure uses EBL1 and VRM1 as an example and is written on the premise
that neither of the EBLs or VRMs is active.
1. Place the cursor on the EBL1 box, then left-click. EBL1 is now active.
2. Place the cursor inside the operational display area, then right-click to show the
[CURSOR] context menu.
3. Select [EBL OFFSET]. The cursor is displayed with a red surround, indicating that
the [EBL OFFSET] mode is now active.
4. With the cursor in the operational display area, left-click. EBL1 moves to the cur-
sor location.
5. Place the offset EBL on the target of interest (Target 1), then left-click.
6. Right-click to deactivate the [EBL OFFSET] mode. The red surround on the cursor
disappears.
7. Place the cursor on the [EBL1] box, then spin the scrollwheel until EBL1 intersects
the secondary target (Target 2 in the example figure).
8. Place the cursor on the [VRM1] box, then spin the scrollwheel until the range
marker on EBL1 aligns with Target 2. The readouts for EBL1 and VRM1, at the
bottom of the screen, indicate the bearing and range between the Target 1 and
Target 2.
9. You can repeat the same procedure on third and fourth targets (shown as "Target
3" and "Target 4" in the above example) by using EBL2 and VRM2.
Bearing is shown relative to own ship with suffix "R" or as a true bearing with suffix "T"
depending on EBL relative/true settings in the [EBL•VRM•CURSOR SET] menu.
1-54
Range
350
340
Marker
330
320
310
Target 2
Target 2
300
EBL1
290
Target 1
Target 1
280
270
EBL
260
origin
250
240
230
220
210
200
190
Range/bearing between targets 1 and 2
EBL1
EBL2
045.3
287.1
°R
°R
Range/bearing between targets 3 and 4
EBL2
000
010
020
030
040
Range
050
Marker
060
Target 4
Target 4
070
R2
080
090
Target 3
Target 3
100
110
120
130
140
150
160
170
180
VRM1
28.11
36.44
NM
TTG 50:00
TTG
VRM2
NM
60:00

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents