System Configuration - Furuno FAR-2218-BB Operator's Manual

SYSTEM CONFIGURATION

The radar(s) must be interconnected to the following type approved sensors:
• Gyrocompass (or equivalent devices) meeting the requirements of the
IMO resolution A.424(XI).
• EPFS meeting the requirements of the IMO resolution MSC.112(73).
• SDME meeting the requirements of IMO resolution MSC.96(72).
The radar may be interconnected via HUB-3000 to other FURUNO processing
units having approved LAN ports.
Note: The footnotes for *
X-band - UP
(for FAR-2218(-BB)/2318, 12 kW)
Sub display
100-115/220-230 VAC
1ø, 50-60 Hz
(for de-icer)
Control Unit
RCU-014 or RCU-015
Control Unit RCU-016
100-230 VAC
100-230 VAC
VDR
(IEC61162-450 format)
100-230 VAC
(Analog RGB)
100-230 VAC
1ø, 50-60 Hz
440 VAC
1ø, 50-60 Hz
NOTICE
1 7
to * are listed in "Notes" on page xix.
ANTENNA UNIT
XN12CF-RSB128-105
XN20CF-RSB128-105
XN24CF-RSB128-105
3
Monitor Unit*
MU-190 or
MU-231 or
MU-270W
Intelligent Hub
HUB-3000* 6
Switching HUB
7
HUB-100*
VDR
Transformer
ANTENNA UNIT
(for FAR-2228(-BB)/2328, 25 kW)
XN12CF-RSB128-106
XN20CF-RSB128-106
XN24CF-RSB128-106
Antenna Cable* 5
Gyrocompass*
Gyrocompass*
AIS Transponder
EPFS*
PROCESSOR
SDME (Speed log)
UNIT
RPU-025
AMS (IEC61162 format)
ECDIS
AMS (Contact)*
Sub Monitor 1 of ECDIS
Sub Monitor 2 of ECDIS
: Standard supply
: Optional or local supply
1
(AD-10 format)
1 (IEC61162 format)
2
(GPS)
4
xv