How To Set Up Function Keys - Furuno FAR-2218-BB Operator's Manual

1.9

How to Set Up Function Keys

Some menu functions and menus can be assigned to a function key. This allows one-
touch access to the assigned function or menu.
To activate an assigned function, press the corresponding function key (F1, F2, F3 or
F4).
The current presets are listed at the bottom of the menu page and the function keys
are preset with the following functions:
F1: Interference Rejector, F2: Echo Stretch, F3:
AUTO-SEA, F4: AUTO-RAIN.
You can change the function assigned to each key us-
ing the following procedure.
1. Open the [MAIN MENU].
2. Select [9 INITIAL SETTINGS].
3. Select [6 FUNCTION KEY SETUP]. The function
key setup menu appears.
4. Select the function key to set up.
5. Referring to the table of available functions be-
low, select a function category, then left-click.
Function
category
ECHO
STD KEY
TT•AIS
DELETE DATA
OPERATION
*: B-types only.
6. Select the appropriate function to assign, then left-click.
You can check the currently assigned functions in the bottom half of the menu.
7. Repeat the procedure as necessary to set up other function keys.
8. Close the menu.
CUSTOM SELECT, IR, ES, EAV, NOISE REJ, ANT SELECT,
PULSE LENGTH, AUTO-SEA, AUTO-RAIN, TUNE SELECT, 2ND
ECHO REJ, STC CURVE, STC RANGE, PM, SART, ECHO TRAIL,
TRAIL T/R, WIPER*, ACE HIGH SENSITIVITY
ALERT ACK, STBY TX, HL OFF, EBL OFFSET, ORIENTATION-
MODE, OFF CENTER, CU-TM RESET, PI LINE, VECTOR TIME,
VECTOR MODE, TARGET LIST, BRILL, MARK, MENU, RANGE
UP, RANGE DOWN, ACQ, TARGET DATA, TARGET CANCEL
TT-DISP, AIS-DISP, TARGET DATA & ACQ, PAST POSN INTER-
VAL, REF MARK, CPA LIMIT, CPA, TCPA, AZ1, AZ2, TARGET
LIST SORT, TRIAL MANEUVER, TRIAL MODE CHANGE, AIS
MESSAGE, AIS SCALED SYMBOL
MARK DELETE, MARK ALL DELETE, OWN TRK DELETE, OWN
TRK ALL DELETE, TGT TRK DELETE*, TGT TRK ALL DELETE*
BUZZER STOP, ECHO AREA*, ECHO COLOR, PALETTE,
RING(ON/OFF), ZOOM, MOB, ALARM1, ALARM2, WATCH ALERT
RESET, TLL*, MAP ALIGN, ANCHOR WATCH, DROP MARK,
SCREEN SHOT
1. OPERATIONAL OVERVIEW
Available function
1-15