How To Select The Mark Inscription Position; How To Select The Mark Color (B-Type Only) - Furuno FAR-2218-BB Operator's Manual

1. OPERATIONAL OVERVIEW
1.42.2

How to select the mark inscription position

You can select the location at which the marker is inscribed from the following:
Location
[CURSOR]
[OWN SHIP]
[L/L]
1. Select the [MARK] box at the bottom-left of the screen then right-click to open the
[RADAR MAP] context menu.
2. Select [4 MARK POSITION].
3. Referring to the table above, select the appropriate location, then press the EN-
TER MARK key.
How to set the co-ordinates
Where [4 MARK POSITION] is set to [L/L], the co-ordinates settings are dis-
played. Co-ordinates can be set one digit at a time, as shown in the figure below.
028º 00.200 S
153º 43.100 E
1) Spin the scrollwheel to change the value, then left-click to move to the next
digit.
2) Repeat step 1 to adjust the Latitude and Longitude as appropriate.
4. Close the menu.
1.42.3

How to select the mark color (B-type only)

B-type radars of this series allow the change of mark colors. For all other types, the
color is fixed and cannot be changed.
1. Select the [MARK] box at the bottom-left of the screen then right-click to open the
[RADAR MAP] context menu.
2. Select [0 NEXT] to show the next menu page.
3. Select [3 MARK COLOR].
4. Select the appropriate color, then press the ENTER MARK key. Available options
are shown in the table below.
Menu
indication
RED
GRN
WHT
5. Close the menu.
1-72
You can select the location using the Control Unit.
Marker is placed at own ship position.
Marker is placed at the co-ordinates selected.
Currently selected digit is highlighted by the cursor.
Left-click to move to the next digit.
Roll the scrollwheel to change the value.
Menu
Color
indication
Red CYA
Green MAG
White
Description
N - North (Latitude)
S - South (Latitude)
W - West (Longitude)
E - East (Longitude)
Menu
Color
indication
Cyan BLU
Magenta YEL
Color
Blue
Yellow