Ais Box Overview; How To Show/Hide The Ais Display - Furuno FAR-2218-BB Operator's Manual

4.2

AIS Box Overview

No.
1 Association indication
2 AIS mode setting
3 [VECTOR]
4 [CPA/TCPA]
5 [AIS CPA]
6 [LOST TGT]
7 [PAST POSN]
8 Trail mode
9 Trail stabilization
4.3

How to Show/Hide the AIS Display

Targets that are being tracked by an AIS transponder can also be displayed on the
display. Click the AIS mode indication to select [DISP OFF], [DISP FILT] or [DISP
ALL].
[DISP OFF]: Turn off the AIS display. (Tracking continues internally.)
[DISP FILT]: Filter AIS targets according to the settings of the AIS target filter. The fil-
ter is not set by default. To set the filter, see section 4.5.
[DISP ALL]: Display all AIS targets.
4
6
7
Indication name
2
1
OFF
9
Description/remarks
Shows the association setting. See section 4.15 for
details.
Shows the current filter setting for AIS target display.
• [FUNC OFF]: AIS display is disabled.
• [DISP OFF]: AIS symbols are hidden.
• [DISP FILT]: Only filtered AIS targets are displayed.
• [DISP ALL]: All AIS symbols are displayed.
• Adjusts the vector time for the selected target.
• True, Relative referencing for this target's vector.
See section 3.12 for details.
Adjusts the CPA/TCPA settings.
Adjusts the AIS auto activate settings.
Adjusts the settings for lost targets and related alerts.
Adjusts the setting for past position tracks. See
section 3.13 fro details.
Changes the trail mode in use. See section 1.37 for
details.
Shows the stabilization reference for trails. See
section 1.37.7 for details.
4. AIS OPERATION
3
5
8
4-3