How To Automatically Plot Target Tracks (A/B-Types Only); How To Delete Tracks - Furuno FAR-2218-BB Operator's Manual

5.4.4

How to automatically plot target tracks (A/B-types only)

To automatically plot target tracks, do the following:
1. Open the menu.
2. Select [2 MARKS].
3. Select [7 TRACKS].
4. Select [3 TARGET TRACK].
5. Select [5 AUTO TARGET TRACK].
6. Select [OFF] or [ON] as appropriate.
Note: When [5 AUTO TARGET TRACK] is set to [ON], [CURSOR MENU] items
[TARGET TRACK ON] and [TARGET TRACK OFF] are disabled not displayed.
7. Close the menu.
5.4.5

How to delete tracks

There are three methods to delete tracks: by percentage of track, by track color or by
cursor selection.
How to erase tracks by percentage
1. Open the menu.
2. Select [2 MARKS].
3. Select [8 DELETE DATA].
Not shown for
IMO-types.
4. Select [5 OS TRACK-COLOR/TIME] or [6 TGT TRACK-COLOR/TIME].
Note: [6 TGT TRACK-COLOR/TIME] is only shown for A/B-type radars.
5. Select the percentage of the track you wish to delete, then left-click. The available
options are: [30%], [50%], [80%] or [ALL].
6. Close the menu.
5. VIDEO PLOTTER OPERATION
Color selection available
only for A/B-types.
Area selection available
only for B-types.
5-11