How To Align The Radar Map; How To Disable The Map Alignment - Furuno FAR-2218-BB Operator's Manual

5. VIDEO PLOTTER OPERATION
5.3

How to Align the Radar Map

When there is positional error between the radar screen and radar map marks and
lines, do the following to correct it.
1. Right-click the operational display area to show the [CURSOR MENU].
2. Select [MAP ALIGN]. The cursor is now highlighted and the [MAP ALIGN] function
is active.
3. Left-click the map at the location you want to move. The map is now "anchored"
to the cursor.
4. Move the cursor to align the radar map with the radar screen, then left-click. The
indication "MAP ALIGN" appears on the right side of the operational display area.
5. Right-click to deactivate the [MAP ALIGN] function.
Display indications affected by map alignment
The following items are also re-aligned when the [MAP ALIGN] function is activated.
• Map marks
• Drop marks
• Anchor watch settings
• Target tracks
• AIS symbols
• EBL offsets (STAB GND mode only)
• Origin marks
• NAV lines and waypoints
Display indications unaffected by map alignment
The following items are not re-aligned when the [MAP ALIGN] function is activated.
• Radar echoes
• TT symbol vector display
• PI lines
• Own ship mark
5.3.1

How to disable the map alignment

1. Right-click the operational display area to show the [CURSOR MENU].
2. Select [MAP ALIGN], then left-click. The cursor is now highlighted and the [MAP
ALIGN] function is active.
3. Press and hold the left button. The "MAP ALIGN" indication is cleared and the
map alignment is cleared.
4. Right-click to deactivate the [MAP ALIGN] function.
5-8
• MOB marks
• Own ship tracks
• Latitude/Longitude Grid
• AIS symbol vector display
• Zoom window display (STAB GND mode
only)
• Cursor position coordinates (when CUR-
SOR L/L ALIGN is set to [ON] only)
• TT symbols
• EBL/VRM reference point
• OS coordinates ([POSN]) display
• Barge mark