How To Restore A User Customized Echo To The Factory Default Settings; How To Edit The Available Customized Echoes - Furuno FAR-2218-BB Operator's Manual

1.28.4 How to restore a user customized echo to the factory default
settings
You can restore customized echo options to their factory default settings (see the ta-
bles on page 1-40 for a list of the default settings).
1. Right-click the [CUSTOMIZE ECHO] box to display the [CUSTOMIZED ECHO]
menu.
2. Select [0 NEXT] to show the next menu page.
3. Select [3 DEFAULT].
4. Select [FACTORY], then press the ENTER MARK key.
1.28.5

How to edit the available customized echoes

To edit which customizations are available from the
[CUSTOMIZE ECHO] box, follow the procedure be-
low.
1. Open the menu.
2. Select [1 ECHO].
3. Select [0 NEXT].
4. Select [3 SELECT CUSTOM]. The [SELECT
CUSTOM] menu appears.
5. Select the customization you want to edit.
The customizations are listed over two menu pages. Select [0 NEXT] to see the
next page, or select [1 BACK] to return to the previous menu page.
6. Select [ON] to make the customization available from the [CUSTOMIZE ECHO]
box, or select [OFF] to hide the customization from the [CUSTOMIZE ECHO] box.
Note: The factory default setting for all items in this menu is [ON].
7. Close the menu.
1. OPERATIONAL OVERVIEW
1-43