1.54.4
How to insert SD cards
The SD card slot is located on the front face of the processor unit, between the LAN1
port and the DVI-I port.
Note: Do not use any instruments to insert the card.
1. Remove the rubber cover on the SD card slot.
2. To insert a card, gently push the card into the slot, making sure that the card con-
nectors are facing downwards.
3. Close the rubber cover.
1.54.5
How to remove SD cards
There are two methods to remove the SD card; with the power on, or with the power
off.
How to remove SD cards with the power on
1. Open the menu.
2. Select [6 FILES]. The [FILES] menu appears.
3. Select [5 REMOVE EXT MEDIA], then select
[YES].
You can now remove the SD card safely.
4. Remove the rubber cover on the SD card slot.
5. Gently push the SD cards to release the card from
the card slot.
6. Remove the SD card. Do not use any instruments to remove the card.
7. Close the menu.
How to remove SD cards with the power off
1. Make sure the power to the Processor Unit is turned off.
2. Remove the rubber cover on the SD card slot.
3. Gently push the SD cards to release the card from the card slot.
4. Remove the SD card. Do not use any instruments to remove the card.
SD- card slot (covered)
1. OPERATIONAL OVERVIEW
1-97