How To Perform A Trial Maneuver - Furuno FAR-2218-BB Operator's Manual

Static trial maneuver
The static trial maneuver shows the relationship between your ship and tracked tar-
gets at the completion of the trial maneuver. The expected position of TTs at the end
of the trial maneuver are shown on the display.
By shortening and extending the trial time you can find the safe time to make a ma-
neuver. Thus, the static trial maneuver will be convenient when you wish to know the
maneuver result immediately.
Course and speed changes
completed; position where
course and speed are changed
Position of target A at end
of trial maneuver
3.17.2

How to perform a trial maneuver

The settings for the trial maneuver are done from the [TRIAL MANEUVER] menu and
the [TRIAL] box, at the bottom-right of the screen.
[ TRIAL MANEUVER ] menu
The [TRIAL] box is not shown if the trial maneuver function is set to [OFF]. See the
following procedure to turn the function on or off.
The indication also changes, depending on the setting for [2 TRIAL MANEUVER].
For [DYNAMIC], the indication shows "D-TRIAL", for [STATIC], the indication shows
"S-TRIAL".
Position of target B at end of trial maneuver
B
Delay time
Current
position
A
T
3. TARGET TRACKING (TT)
[ TRIAL ] status
[ TRIAL ] box
3-25