How To Change Color Schemes (Palettes) - Furuno FAR-2218-BB Operator's Manual

1. OPERATIONAL OVERVIEW
1.44.1

How to change color schemes (palettes)

This radar provides six sets of color and brilliance schemes to match any ambient
lighting condition and can be assigned to a [BRILL] box preset.
1. Place the cursor on the [PLT] indication, inside the brilliance settings box at the
bottom-left of the screen.
The indication appears highlighted with a light-blue colored box.
Right-click to show the [BRILL1] box menu.
2. Select [3 PALETTE].
3. Select the appropriate palette, then press the ENTER MARK key. The default set-
tings for each palette are shown in the table on the following page.
PALETTE
DAY-GRY
DAY-BLU
DAY-GRN
DUSK-GRY
DUSK-BLU
DUSK-GRN
NIGHT-GRY
NIGHT-BLU
4. Close the menu.
How to assign/change the brilliance presets
1. Place the cursor on the [PLT] indication, inside the brilliance settings box at the
bottom-left of the screen.
The selected item appears highlighted with a light-blue colored box.
Right-click to show the [BRILL1] box menu.
2. Press the left button to cycle through the presets. There are four available:
[PLT1], [PLT2], [PLT3] and [PLT4].
3. To change the palette for a preset, place the cursor on the "PLT" indication, then
right-click. The [BRILL] menu appears.
4. Follow steps 2 to 4 in the procedure above.
5. Repeat the process to change color scheme palettes for other presets.
1-80
BRILL PANEL OTHERS
100 15
100 15
100 15
40 7
40 7
40 7
4 3
4 3
PLT1
Place cursor here, then
left-click to change
100
brilliance preset,
right-click to open the
[BRILL] menu.
TEXT
COLOR
15 WHITE GRAY/BLACK
15 WHITE BLUE/DARK BLUE
15 GREEN GRAY/BLACK
12 WHITE DARK GRAY/DARK
BLUE
12 WHITE DARK BLUE/BLUE
12 GREEN DARK GRAY/BLACK
12 ORANGE DARK GRAY/BLACK
12 WHITE DARK BLUE/BLUE
BCKGRND/CIRCLE